Products / Control cables – for normed safety / H05V3V3H6-F
Usage
Control cables for lifts with large hub heights and high travel speeds.
Properties
These are cables for use under lifts both indoors and out. In the latter case, the cables should be protected from direct rain, snow and sunlight.
The cables are suitable for ambient temperatures of -15° C to +40° C. The maximum travel speed is 4.0 m/second and there is a maximum hanging height of 45 m.
In the event of larger hanging heights and greater travels speeds, the cables must be supplied with stress relief element based on the construction type above which will enable a travel speed of a maximum of 6.3 m/second and hanging heights of over 45 m.
In the event of special regional conditions, in particular, for example, lower ambient temperatures the upper limit for travel speed and acceleration may need to be reconsidered.
Technical data
Download datasheetConductor | Flame retardancy |
Litz fine
copper wire, not insulated according to VDE 0295 class 5 / IEC 228 class 5 |
IEC 332.1 or VDE 0482 Part 265-2-1 |
Insulation | Bending radius |
PVC TI 4 according to VDE 0281 Part 1 | 10 x D (cable thickness) |
Core identifier | Conductor resistance |
Black cores with white numbers, earth conductor green-yellow |
0.75 mm² - max. 26.0 Ohm/km 1.00 mm² - max. 19.5 Ohm/km |
Core arrangement | Test voltage |
cores are arranged in parallel and in groups of up 4 to 5 cores | Effective 3,000 Volts |
Sheath | Nominal voltage |
PVC TM 4
according to VDE 0281 Part 1 Default colour, black RAL 9005 |
Maximum of 500 Volts |
Norms | Breakdown voltage |
According
to or based on VDE 0281, 0293, 0295, 0472, 0473, 0482 EN 50214 |
Minimum 6,000 Volts |
Temperature range | Resilience up to 30° C |
In motion
-15° C up to +70° C, still up to -30° C In motion outdoors -15° C to +40° C (in accordance with EN 50214) |
See Technical information |
The product conforms to the 2006/95/EU directive ("low voltage directive") CE.